news

Face paper and bottom paper adopt optical fiber detection servo tracking, the lamination accuracy is more accurate, without manual adjustment before and after.

The front and back left and right optical fiber detects the paper movement track, and the alarm stops when the paper is walking wrongly.

Introduction to Setup Components

Corrugated Paper Table

Servo paper feeding, only need to input the length and size, the air pressure paper lever can deliver the paper continuously with high accuracy.

Electric thick lever, easy to operate.

The paper table is equipped with photoelectric counting electric eyes, wireless eyes, and stops alarming when there is no paper.

The paper table is equipped with a suction dust collecting filter device, which can absorb the paper dust of the bottom paper. Avoid blockage of the switcher and blower.

Paste bonding department

The stainless steel anilox roller applies the paste evenly, and the paste volume and the bottom paper draught can be easily adjusted through the handle to ensure that the paste is evenly coated on the bottom paper.

Use the probe to detect the height of the paste surface to control the work of the automatic pump paste system. The loss of paste is automatically replenished to ensure the quality of the paste; when the probe detects that there is no paste, the machine will automatically Downtime.

Introduction to Setup Components

Paste bonding department

The suction nozzle of the paste pump adopts a filter screen to filter out the impurities in the paste, ensure the quality of the paste, and extend the service life of the paste pump system and the paste mechanism.

The bonding of the top paper and the bottom paper is completed by two sets of pressure rollers. The gap of the first group of pressure rollers is the same as the thickness of the paper. The fit is stronger.

It adopts synchronous toothed belt drive, which greatly improves the smoothness of the transmission and reduces the noise of the machine.

Whole machine transmission

The power source of the whole machine is driven by a variable frequency motor servo motor, which ensures the different speeds required by different products.

The main transmission parts of the whole machine are driven by toothed belts, which reduces noise and reduces the walking loss of the parts themselves to ensure accuracy. The maximum speed of the machine is increased to 170 sheets per minute.