products

Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Single Facer Machine For Corrugated Paper Making, 2 Layer Corrugator Line, E Flute Single Facer Machine, We warmly welcome your participation based on mutual benefits in the near future.
Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang Detail:

※Structural features:

★Heating plate surface by grinding treatment,hot plate width600mm.
★Preheat board is made of container board,  in accordance with the national standard of pressure container, enclosed the pressure container certificate and inspection certificate.
★Hot plate with intensive gravitational roll structure.Pressure roller with lifting hydraulic structure
★heat pipe of the heating board three section of control temperature, temperature display.
★up cotton belt with double cylinder S cotton belt tensioning device.
★bottom cotton belt with s-shaped correction manually tensioning mechanism,  structure simple and practical,under with manual fine-tuning。
★Drive roller coated with attached wear-resistant rubber ,showed a herringbone structure,With a high, ensure smooth cardboard output。
★Main drive motor for frequency conversion motor,low-speed torque,wide speed range ,reliable, and easy maintenance.
★hot plate internal for partition isolation structure,s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam

※Technical parameters:

1、temperature requirement:160—200℃ steam pressure:0.8-1.3Mpa
2、air source pressure:0.6—0.9Mpa
3、Cooling stereotypes length:4m Heating plate quantity:14 pieces
4、Hydraulic system pressure:6—8Mpa   max working width:200m/min

※Roller diameter parameters:

1、upper drive rubber roller diameter:¢440mm lower drive rubber roller diameter: ¢440mm Wear rubber Outsourcing
2、Former follower with roller diameter:¢270mm After setting belt driven roller diameter:¢186mm
3、pressure belt roller diameter:¢70mm Shaping roller diameter:¢86mm
4、The belt tension roller diameter:¢130mm The roll diameter with detuning:¢124mm
5、Under the belt tension roller diameter:¢130mm Entrusted with the roll diameter under the belt:¢130mm
Note: All the roller surface after grinding are hard chrome plated

※Powered motor parameters:

1、Main drive motor power:45KW 380V 50Hz Continuous (S1) working standard

※Mainly purchased parts, raw materials and origin:

 

n.png


Product detail pictures:

Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang detail pictures


Related Product Guide:

We believe in: Innovation is our soul and spirit. Quality is our life. Customer need is our God for Manufactur standard Corrugator Double Facer Roll Cutter - Double facer SM-F – Xinguang , The product will supply to all over the world, such as: Dominica, Qatar, Venezuela, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
  • This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Gabrielle from The Swiss - 2017.11.01 17:04
    Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Jo from Guatemala - 2018.06.18 17:25
    Write your message here and send it to us